 |
 |
Motor Type:
DMS100.AL.4.F0S-M2
Manufacturer:
Franz Kessler
Exchange: Please Call
New: Please Call
Endeavor Technologies specializes in rewinding stators for integral spindles. This Franz Kessler DMS100.AL.4.F0S-M2winding has been molded with our Epox-E-Pak insulation system. Better than the original molding, our process floods the winding with an epoxy thermal set resing while under vacuum. Endeavor Technologies also upgrades your Kessler DMS100.AL.4.F0S-M2 stator with specially imported Hitachi lead wire rated for 200°C and highly resistant to chemical attack. Every step of our winding process is carefully engineered to ensure that your Franz Kessler DMS100.AL.4.F0S-M2 spindle stator is returned to factory specification or better as quickly as possible. Our process avoids the delays and potential damage of traditional repair techniques, allowing a faster turnaround. Our highly skilled technicians apply the most rigorous standards to ensure that your valuable equipment will enjoy the longest possible service life. Please check out our winding process for more details.
Franz Kessler manufactures an extraordinary array of highly engineered motorized spindles and spindle motors for machine tool builders. Whether your need is high power output in a small package, high speed, ultra low vibration, or a combination of all of these Kessler has the solution.
These technically sophisticated motors require special training, factory support, and a knowledge of the relevant standards to ensure optimal operation after servicing. Please click here to Contact Us.
From ABA to Z&B grinders, and everything in between--Chiron machining centers, Pomini roll grinding machines--as an authorized service partner, Endeavor Technologies is equipped, trained, and supported. We guarantee to return your motor to the factory specification.
Endeavor Technologies has the required tooling, experience, and factory supplied parts to rebuild the motors on roll grinding machines manufactured by Pomini and Waldrich Siegen. These sleeve bearing motors produce ultra low vibration partly through the use of sleeve bearings. These bearings must be perfectly aligned with special tooling while the motor is assembled on a granite surface plate. The felt sealing material is not commonly available and new seals must be installed and the fit adjusted correctly. After assembly, the bearing break-in period is 32 hours during which the oil temperature and vibration is carefully monitored.
Don't take a chance having your Kessler spindle motor "repaired". Send it to Endeavor Technologies for comprehensive rebuilding and testing.