 |
 |
DMS100.AL.4.F0S
Franz Kessler
Motor Type:
DMS100.AL.4.F0S
Manufacturer:
Franz Kessler
Exchange: Please Call
New: Please Call
Your Franz Kessler motor DMS100.AL.4.F0S will be carefully evaluated by experienced technicians to determine if it is faulty. After disassembly and cleaning, the windings will be checked with a digital surge tester, and DC hi-pot. Critical mechanical dimensions will be measured with micrometers, and all test results become part of the permanent record of the motor in our database. If the motor winding has failed, the old winding will be carefully reverse engineered before being stripped with a mechanical stripping method that prevents any damage to the insulated core. A new winding utilizing class H magnet wire and all class H insulation will be installed. Worn mechanical components will be fabricated or re-furbished by our expert machinists. Our machine shop is fully equipped with lathes, mills, and precision grinding equipment. Rotating components will be precision balanced on one of our Schenck Trebel hard bearing balancing machines. New bearings, seals, and any other required parts will be installed during assembly, and the feedback device will be aligned and tested. Mechanical assembly tolerances such as shaft and flange runout will be verified to be within factory tolerances.
Finally the motor will be test run, checked for excessive noise or temperature, and vibration levels recorded. All test data becomes part of our database, and a link to the final service report will be emailed to you upon request.
Back to Franz Kessler listing...
Endeavor Technologies is proud to be a Franz Kessler authorized service partner for rebuilding AC and DC spindle motors in the USA.
Franz Kessler manufactures an extraordinary array of highly engineered motorized spindles and spindle motors for machine tool builders. Whether your need is high power output in a small package, high speed, ultra low vibration, or a combination of all of these Kessler has the solution.
These technically sophisticated motors require special training, factory support, and a knowledge of the relevant standards to ensure optimal operation after servicing. Please click here to Contact Us.
From ABA to Z&B grinders, and everything in between--Chiron machining centers, Pomini roll grinding machines--as an authorized service partner, Endeavor Technologies is equipped, trained, and supported. We guarantee to return your motor to the factory specification.
Endeavor Technologies has the required tooling, experience, and factory supplied parts to rebuild the motors on roll grinding machines manufactured by Pomini and Waldrich Siegen. These sleeve bearing motors produce ultra low vibration partly through the use of sleeve bearings. These bearings must be perfectly aligned with special tooling while the motor is assembled on a granite surface plate. The felt sealing material is not commonly available and new seals must be installed and the fit adjusted correctly. After assembly, the bearing break-in period is 32 hours during which the oil temperature and vibration is carefully monitored.
Don't take a chance having your Kessler spindle motor "repaired". Send it to Endeavor Technologies for comprehensive rebuilding and testing.
Franz Kessler manufactures an extraordinary array of highly engineered motorized spindles and spindle motors for machine tool builders. Whether your need is high power output in a small package, high speed, ultra low vibration, or a combination of all of these Kessler has the solution.
These technically sophisticated motors require special training, factory support, and a knowledge of the relevant standards to ensure optimal operation after servicing. Please click here to Contact Us.
From ABA to Z&B grinders, and everything in between--Chiron machining centers, Pomini roll grinding machines--as an authorized service partner, Endeavor Technologies is equipped, trained, and supported. We guarantee to return your motor to the factory specification.
Endeavor Technologies has the required tooling, experience, and factory supplied parts to rebuild the motors on roll grinding machines manufactured by Pomini and Waldrich Siegen. These sleeve bearing motors produce ultra low vibration partly through the use of sleeve bearings. These bearings must be perfectly aligned with special tooling while the motor is assembled on a granite surface plate. The felt sealing material is not commonly available and new seals must be installed and the fit adjusted correctly. After assembly, the bearing break-in period is 32 hours during which the oil temperature and vibration is carefully monitored.
Don't take a chance having your Kessler spindle motor "repaired". Send it to Endeavor Technologies for comprehensive rebuilding and testing.